.

Products

Robot Series RTE 400

igm RTE497

More than 40 years experience in the development of welding robots and planning of production plants appear in a extensive range of system modules. The main module is the igm robots series RTE 400.

For igm robots typical benefits:

  • Outstanding programming techniques with both the K6 programming teach pendant and the offline teaching system.
  • Large work zone and perfect welding access to seam positions due to an optimal axial geometry and holding of the welding torch in the wrist axis, implemented as a hollow shaft.
  • All cables are inside the robot arms using hollow shafts.
read more

Robot Control RCE + K6

01_igm_control_K6-de_001

Concept of RCE control system

The control system is a fully digital controlled system. This means there are only digital signal processors (DSP) involved in the entire control system and not any analogue electronic component. All the components of the control system (such as control cabinet, welding power source, each axis and the teach pendant) are linked by a digital bus system. 

A full digital robot control system brings the following advantages:

  • No influence by any environmental disturbance like inductive fields of welding cables
  • Quickest response time by fastest bus connection > smooth motion of robot
  • Absolute reproducibility of welding result > highest consistency in welding quality
  • Easy diagnosis possibilities of the entire robot control system > less skills and no special instruments for diagnosis are necessary
read more

Software Components

01_igm_i4i_Daily Report_1_77x77@400
  • Robonet: Network operation and remote access
  • ISDES embedded: Weld seam and operating data acquisition system
  • Smartstep: Generating robot programms
  • iPAT: manipulation and the assembling of robot programs
  • i4i: Visualisation of system status

 

read more

igm offline teaching of welding robots

01_igm PP_OLP_2018-D857663

Operational availability of the robot installation for production is increased by using an off-line system for generating robot programs. While saving time, programs may be prepared more conveniently in an office environment and simulation test runs (accessibility, computation of cycle time) may be performed. Collisions of the robot with the workpiece or fixtures may be detected at an early stage.

Offline teaching - Online working

Simple robot programming is available through the self developed PC-based off-line teaching system, using the original software of the robot control system and the teach pendant K6.

read more

igm sensor systems

01_igm PP_iCAM_2018-D857296b

igm gas nozzle searching - Tactile sensor for position detection

This tactile sensor is used to determine the workpiece position or its components and individual parts by gaging the surface of the workpiece. In each case, the successional part of the program is shifted according to determined deviations.

Sensor shifting may be applied for correction of an arbitrary amount of individual points, entire sections of a welding program or entire programs. Combination with arc seam sensing is feasible. The control system supports shifting, rotating, and tilting of a program, depending on position change.

read more

Robot-/ workpiece periphery and portal systems

01_igm_tla3_tqa_tha_001

igm robot periphery

The basic device is mounted on the robot periphery in an upright or suspended position. The external axes of the track systems are fully integrated in the control system as NC axes, significantly extending the working area of the robot.

A variety of different rotating and linear units are available, either as single axes or combined with up to three positioning units. It is also possible that several robots share a track axis. The positioning range of a longitudinal axis is up to 100m.

read more

igm compact systems

01_igm_p2w10_001

The igm compact systems are optimized in all mechanical aspects as well as the control hardware and software for arc welding work. In this combination of work piece and robot peripherals, the entire system is kept compact, since the robot changes workstations simply by pivoting the rotary arm or in other configuarations the work station is positioned by a workpiece turning mechanism.

read more

igm complete systems – production lines

igm PP_FMS system

FMS - Flexible manufacturing system – customised by igm for your purpose  

For special applications, igm produces customized constructions for your individual needs. The applications are for example gas bottles machines, straight line machines or complete production lines.

Customised robots:

In these flexible systems more than just the welding technology is required: loading, conveying, stretching, bending, cutting, measuring, manipulating, editing, storing, unloading, controling.

Complex manufacturing tasks require flexible solutions. igm has experiences over many years in engineering and realisation of full automatic manufacturing lines for various piece parts sub components. For additional production requirements we provide handling devices, we develop special purpose machines and take care of your whole project from order placing up to final commissioning as a main contractor.

read more

igm welding torch and torch exchange system

01_igm_torches_MAG_001

The welding torches are designed for use on robots for high-performance welding under harsh conditions. The slim design, together with the swan’s neck shape, permits the best accessibility even in narrow parts of the work piece. All welding torches provided as standard for igm robots have a particularly stable design with intensive water cooling and a quick-release coupling. They are also configured for pneumatic torch cleaning with compressed air at least 7 bar and for the use of the gas nozzle as a tactile sensor for program shifts.

The arrangement of the contact tube in connection with the torch curvature ensures the forced contact of the welding wire. This ensures a uniform and constant current transition to the wire electrode under all conditions and wear conditions.

read more

Processes – smart robotics

igm AP_Process Pick&Place

Weldung and cutting processes

Depending on material and sheet thickness following processes are used:

  • Arc Welding MIG/MAG
  • Tungsten Inert Gas Welding TIG Cold & Hot Wire
  • Plasma - welding or cutting
  • Friction Stir Welding
  • Laser-Hybrid Welding
  • Spotwelding / Tacking

igm robots may be used for all non-contact welding and cutting processes. Power sources from many well-known manufacturers can be integrated with our robot systems for welding and cutting applications. Products range from digital inverter power sources for MIG/MAG welding, TIG applications, plasma cutting and welding apparatus to high-capacity devices for the tandem process.

read more

igm bevelling machine iBS

igm_ibs_icam_001

Sensor-controlled bevelling system for automated welding seam preparation with plane steel plates. The stable portal construction including application-oriented design of the cutter head supports all types of upper side or bottom side cuts with sensor-controlled edge tracking.

A laser camera measures the workpiece position and tracks the edges, ensuring requested base heights with a tolerance of +/- 0.5 mm even with heat distortion. The system processes the required bevels, which are defined by simply clicking and indicating the geometry parameters in a CAD drawing of the component, with the specially developed software.

read more